Battery light on? Testing the alternator and charging system
Dim lights, slow cranks and a battery warning can mean the battery, the alternator or the cables. A simple test sequence before you buy parts.
Symptoms, causes and fixes for the problems we hear about most at the parts desk.
Dim lights, slow cranks and a battery warning can mean the battery, the alternator or the cables. A simple test sequence before you buy parts.
A clunk over bumps or when braking is common on LX/LD/LC cars. Here are the usual suspects, how to test each one, and which parts to replace.
A clicking noise in tight turns usually means a worn outer CV joint. How to inspect CV boots, diagnose half shafts and pick the right replacement axle.
A violent front-end shake after a bump on a solid-axle Ram HD is called death wobble. Here's what causes it, how to find the worn part and how to fix it.
Temperature gauge climbing? Work through coolant level, leaks, thermostat, fans, water pump and radiator in the right order, without guessing.
A check-engine light for an EVAP leak is rarely serious, but it won't fix itself. How Mopar EVAP systems work and how to find the leak.
Long cranks, stalling under load or a no-start can point to the fuel pump. How to test it properly and what comes in a Mopar fuel pump module.
Not every HEMI tick means a failed lifter. How to tell a broken exhaust manifold bolt, injector noise and a real valvetrain problem apart.
A growl that rises with road speed is often a wheel bearing. How to confirm it, tell it from tire noise and choose the right hub assembly.
The 3.6 Pentastar's oil filter housing and cooler are a well-known leak point. How to recognize it, why it happens and how the repair is done.
The Totally Integrated Power Module controls power to everything from the fuel pump to the horn. How TIPM problems show up and how to diagnose them.
A shifter that moves but the transmission stays in gear, or a gear indicator that doesn't match, often points to a worn shift cable bushing.