Fitment & Part Numbers

Charger, Chrysler 300, Magnum & Challenger: shared LX parts explained

Four Mopar cars share one rear-drive architecture. Here's which parts are truly shared between the Charger, 300, Magnum and Challenger, and which only look alike.

Silver Chrysler 300 sedan with mesh grille
Photo: LouieRBLX / CC BY-SA 4.0

When Chrysler launched the 2005 Chrysler 300 and Dodge Magnum, it introduced a rear-drive car platform known as LX. The Charger (2006) and Challenger (2008) followed. The Challenger uses a shortened version coded LC. For parts shoppers, that family tree means a lot of overlap, and a lot of traps.

Who’s in the family

Car Years Platform code
Chrysler 300 2005–2010, 2011–2023 LX, then LD
Dodge Magnum 2005–2008 LE (wagon on LX architecture)
Dodge Charger 2006–2010, 2011–2023 LX, then LD
Dodge Challenger 2008–2023 LC (shortened wheelbase)

Usually shared (check the number anyway)

  • Engines and engine parts. The 2.7, 3.5 and 3.6 V6s and the 5.7, 6.1 and 6.4 HEMIs were used across the family. Gaskets, sensors, ignition parts and many cooling parts are common within the same engine and year range. HEMI owners should also read why your HEMI has 16 spark plugs.
  • Transmission service parts. The 5-speed (NAG1) automatic and later the 8-speed were used across the family. Filters and pan gaskets match within the same transmission.
  • Hub and bearing assemblies, many brake parts. Within the same brake package and drive type (RWD or AWD), front and rear wheel bearings and hubs are frequently shared.
  • Some suspension links and bushings. The rear multi-link layout is shared, but the Challenger’s shorter wheelbase and different tuning mean some parts are unique.

Rarely shared

  • Anything you can see. Body panels, glass, lighting, mirrors, bumpers and interior trim are model-specific. The 300 and Charger sedans share no exterior sheet metal.
  • Interior electronics. Radios, clusters and switch panels differ by brand and year, even when the connectors look the same.
  • Wagon-only Magnum parts. Liftgate, liftgate struts, rear glass, rear HVAC on some trims and cargo trim exist only on the Magnum. See our Magnum parts guide.
Interior of a Dodge Magnum with steering wheel, gauges and center stack
Early LX interiors share switch designs, but trim colours and connectors vary by model and year. Photo: Greg Gjerdingen from Willmar, USA, CC BY 2.0

SRT and police versions

The 300C SRT8, Magnum SRT8, Charger SRT8 and Challenger SRT8 shared the 6.1 HEMI (2005–2010), then the 6.4 from 2011. SRT cars added Brembo brakes, unique suspension tuning and bigger cooling packages. Police-package Chargers add heavy-duty cooling, brakes and electrical parts that don’t match retail cars.

AWD is its own branch

All four cars offered AWD versions in certain years. AWD changes the front suspension geometry, adds a transfer case and front half shafts, and often uses a different front knuckle. Never assume a RWD part fits an AWD car. Our CV axle guide covers the AWD driveline.

Bottom line

The LX family is the reason so many parts are still easy to find for a 2005 Magnum. But “shared platform” is a starting point, not a fitment guarantee. Match the part number, then the model year, engine and drive type. If in doubt, send us your VIN.