Fitment & Part Numbers

Dodge Challenger 2008–2023: the year-by-year changes that affect parts

The modern Challenger ran 16 model years with one body. These are the mid-cycle changes that decide which parts fit your car.

Sublime green Dodge Challenger SRT Hellcat on a country road
Photo: Ermell / CC BY-SA 4.0

From the outside, a 2009 Challenger and a 2023 Challenger look like the same car with different paint. Underneath, Chrysler (later FCA, then Stellantis) changed engines, transmissions, interiors and electronics several times. Its internal code, LC, stayed the same the whole time, so the code alone won’t settle fitment. The model year and options will.

The milestones

Model year Change that matters for parts
2008 Launch: SRT8 only, 6.1 HEMI, automatic only
2009 SE (V6) and R/T (5.7 HEMI) added. Manual transmission available on R/T and SRT8.
2011 3.6 Pentastar replaced the 3.5 V6. SRT8 moved to the 6.4 (392) HEMI. Revised interior and steering wheel.
2015 Major refresh: new interior and dash, 8-speed automatic, LED-accented lighting, Hellcat 6.2 supercharged added
2017 GT AWD (V6) added, with unique front driveline parts
2018 SRT Demon (one year), Widebody and Redeye packages begin to roll out
2019 Hood and fascia revisions on several trims. Redeye added.
2020–2023 Special editions and the 2023 “Last Call” cars. Mostly carryover parts.

The 2015 line in the sand

If you only remember one year, make it 2015. The refresh changed:

  • The entire dashboard and console. Instrument clusters, switches, vents, bezels and the steering wheel are different.
  • The automatic transmission. The 5-speed was replaced by the TorqueFlite 8-speed, with its own shifter, cooler lines and filter. See our 8-speed service guide.
  • Electrical modules. Many modules, connectors and harness routings changed.

So a “Challenger dash bezel” or “Challenger steering wheel” listing must say which side of 2015 it fits. Our carbon fiber steering wheels are listed by year range for this reason.

Black Dodge Challenger SRT Hellcat Redeye Widebody
Widebody cars use unique fenders, fender flares and wider wheels and tires, so many body parts are package-specific. Photo: MrWalkr, CC BY-SA 4.0

Engine packages change more than the engine

The same model year can carry a V6, a 5.7, a 6.4 or a supercharged 6.2. Beyond the engine itself, the package changes:

  • Cooling. Radiators, fans and coolers vary, and supercharged cars add a separate low-temperature circuit for the charge air coolers.
  • Brakes. Base, four-piston and six-piston Brembo setups use different calipers, rotors and sometimes knuckles. More in our Brembo upgrade guide.
  • Suspension. SRT cars use adaptive dampers on many years, with their own shocks and wiring.

Manual vs automatic

Manual-transmission Challengers (Tremec six-speed on V8 cars) use their own clutch, flywheel, shifter, and in some years rear axle ratio. If your car is a manual, say so when you order. A part listed for “Challenger R/T” may assume an automatic.

How to buy the right Challenger part

  1. Find the part number on the old part or confirm it with your VIN.
  2. Add your car to My Garage with the exact trim and engine. Our fit badges then show what fits.
  3. When a listing says Check fitment, send us your VIN for a free check.

Shopping for a used one? Our pre-purchase inspection checklist covers the generation-specific trouble spots to look for.